Die Cast Press Cold Chamber Aluminum
and
Hot Chamber Zinc Shot Ends
|
Aluminum / Cold Chamber Shot End
- New C-Frame installed or existing remanufactured
- Cylinder to be of bell mounting
- Combination shot cylinder on shot manifold
- Din cartridge valving (cartridge insert type) proportional valve for meter out shot control
- Combination rear cylinder head. Piston accumulator mountings and
valving
- Piston accumulator
gas bottle driven.
- Approach speed control.
- Transducer and gauge ports provided
- Limit switches operating rod provided can be changed to encoder type shot control
- 4 to 1 Multiplier, integrated, piston accumulator driven with manifold
- Pressure control and integrated valving inserted in manifold
- Base extension to support C-Frame
- Throttle valve provided for meter
out shot control
|
Zinc / Hot Chamber Shot End
- New A-frame installed or remanufacture existing A-frame,
complete re-machining and qualification.
- Proportional shot control

- Hydraulic draw cylinder option available
- Fixed European style a-frames also available
- Heavy duty shot cylinder with bell
flange mounting
- Combination shot cylinder on shot manifold
- New design cartridge valving inserted type
- Manual flow control, insert type
- Combination return cylinder head, piston accumulator mountings and valving
- Piston accumulator gas bottle driven
- Slow advance speed control
- Shot return speed control cartridge type with flow control
- Automatic accumulator discharge
- Throttle valve for meter out shot
control
- Transducer and gauge ports provided
- Limit switches operating rod provided can be changed to
encoder type shot control
- Water cooled cylinder head
- Water cooled sensor block
- Direct couple, flanged style transfer tube replacement for
those old style distant shot pipes
- Shot control and monitoring systems
also available
|
CALL DIE CAST PRESS FOR
ADDITIONAL INFORMATION
ON OUR CUSTOM SHOT END
(269) 657-6060
|

Die Cast Press Zinc and Aluminum Shot
Ends are easily installed
by our personnel or yours and are
retrofitted
to your existing machine for better
performance, faster response times
and new technology.
With integrated
cartridge valving and direct-coupled
piston accumulator, it is nitrogen
gas driven from an additional
bottle. Our shot ends include a 4:1
multiplier that is driven by an
independent piston accumulator and
is direct coupled to the end of the
multiplier cylinder, with auto
accumulator unloading.
These shotends have super response time,
excellent transitions in all phases
from 6"-400" per second with
consistence and repeatability. We
offer diagonal ramping capabilities
through acceleration speed changes
(higher velocity is available for
magnesium) and unsurpassed
consistence in low impact phase.

New "DCP" Cold Chamber Shot End installed on
an 800 ton Prince |
YES! These
retrofit shot ends are ready to install on most die cast
machines
YES! We can
convert your
platens and mountings
YES! We can mount
to your platens
YES! We can quote
installation
YES! DCP
Technicians are available
|
|